Four Misunderstandings About LCD Splicing Screen
- May 17, 2018 -


lcd module .jpg


1. Is the LCD splicer thinner?

Relevant research shows that the thickness of the spliced large screen is reduced by 20%, and its response speed will be increased by 35% on the original basis. So does this mean that the thinner the LCD splicing products, the better? Of course, the answer is negative, because thinning the product will also bring about a certain negative impact, users must be aware of before buying.

The thinner the product thickness, the higher the requirement for the manufacturing process. If the production process is not closed, not only the color of the screen display will be dimmed, but also the viewing angle will become smaller. At the same time, the probability of occurrence of bad spots on the screen will increase. , And the product yield will be reduced. So far, the industry does not have a very sophisticated technology to solve the above problems. Therefore, to produce thin and light products, the production cost of the manufacturers will increase a lot, and accordingly, transfer to the industry users, the cost of use will be greatly increased .

Second, LCD splicing screen application will have no temperature limit?

If you want to ensure the efficient application of LCD splicing screen, the ambient temperature is a factor that cannot be ignored. In general, the best use temperature of the LCD splicing screen is between 0 and 40 degrees Celsius, because the thermotropic liquid crystal used in the LCD screen is derived from the temperature change, and its photoelectric effect is controlled by the temperature if the temperature is not in its Within the use temperature range, it is equivalent to getting rid of the electric field control without the photoelectric effect, and various problems will arise.

In practical applications, if the ambient temperature conditions are relatively harsh, users are advised to install air conditioners and set the temperature between 25 and 26 degrees Celsius to ensure that the LCD video wall is in the best working condition.

Third, LCD splicing screen certainly will not appear color difference?

Many well-known, DLP splicing screen will appear color decay after a period of use, that is, color, affect the use of effects. So, LCD splicing screen really does not appear color difference? In fact, after a certain period of time, LCD splicing screen will also appear color attenuation, and this attenuation is irreversible, but its attenuation does not happen often, and, for this, many manufacturers have some adjustment means , thereby effectively extending the service life.

Fourth, the greater the size of the LCD splicing unit, the greater the power consumption will be?

In the current field of LCD splicing, large size and energy saving and environmental protection have become a hot trend. However, for many industry users, this has become a helpless thing, because in the potential consciousness of many people, large size will bring about high power consumption? But in fact, it's not.

Relevant studies have found that the power consumption of LCD splicing units with different sizes varies little. For example, the mainstream 46-inch, 50-inch, and 60-inch LCD splicing units on the market consume approximately the same amount of power under the same conditions. Strictly speaking, the power consumption of the LCD splicing screen is determined by the number of liquid crystal splicing units. The more the number, the greater the power consumption of the screen body. Therefore, if the user has a large-size screen application requirements, by selecting a large size The splicing unit to reduce the number of splicing, but will be more energy-efficient.